6330 Camellia Ave, North Hollywood, CA 91606
(818) 536-7759
★ 5.0/5 Rating — 7 Reviews | NADCA-Certified Air Duct Cleaning | CSIA-Certified Chimney Sweeps | Licensed & Insured | Same-Day Service Available | Free Written Quote
Dans Hollywood Chimney and Air Duct Cleaning
Dans Hollywood
Chimney & Air Duct
NADCA-Certified · Full System · San Fernando Valley

HVAC Cleaning Near Me

Complete HVAC system cleaning — all duct branches, blower wheel, evaporator coil, and air handler. NADCA-certified, GWP-qualified, before/after documentation. From $299.

★★★★★ 5.0 · 7 Reviews · NADCA-Certified · Licensed & Insured · Same-Day Available

What Full HVAC Cleaning Actually Means — and Why It's Different from Air Duct Cleaning Alone

Most services advertised as "HVAC cleaning near you" are actually partial cleaning — the duct branches only. A complete HVAC cleaning addresses every component through which your indoor air moves: the supply and return duct branches, the main trunk lines, the air handler cabinet interior, the blower wheel and motor assembly, the evaporator coil (the cooling component where mold and biofilm most commonly accumulate), and the condensate drain pan.

Dans Hollywood Chimney & Air Duct Cleaning provides full NADCA-standard HVAC system cleaning throughout the San Fernando Valley. Glendale Water & Power (GWP) customers may qualify for GWP rebates on documented HVAC system cleaning — we provide the required documentation. We also serve LADWP, SoCal Gas, and Southern California Edison territories.

Why Choose Dan's

What Makes Us Different

Full System — Not Just the Ducts

Complete HVAC cleaning includes all duct branches, main trunk, blower wheel, air handler cabinet, evaporator coil accessible surfaces, and condensate drain pan. Most competitors stop at the duct branches.

Evaporator Coil Cleaning

The evaporator coil is where the most significant biological accumulation occurs — biofilm, mold, and condensate residue combine with dust to create a layer that degrades heat exchange efficiency by 15–30%. We clean accessible coil surfaces on every full-system job.

GWP Rebate Documentation

Glendale Water & Power offers rebates for qualifying HVAC maintenance. We provide written completion documentation formatted for GWP rebate submission on every Glendale job.

NADCA ACR Standard Compliance

Our cleaning follows the NADCA Assessment, Cleaning, and Restoration (ACR) standard — the only nationally recognized protocol for HVAC system cleaning. We can provide ACR compliance documentation on request.

Before/After Photos at Every Component

Every blower wheel, coil, and duct register is photographed before and after cleaning. You receive the complete documentation set — proof of work, not just a claim.

Antimicrobial Treatment Available

Following system cleaning, EPA-registered antimicrobial treatment can be applied to duct surfaces and the evaporator coil housing to inhibit biological regrowth between cleanings. From $89.

Our Process

What Happens on the Day of Service

1

System Assessment & Documentation

We assess the full HVAC layout — supply and return register count, trunk line configuration, air handler location, and coil/blower access. Baseline photos at every component before work begins.

2

Negative-Pressure Establishment

Truck-mounted system connects to the main trunk line to establish 5,000+ CFM negative pressure throughout the duct network. This prevents any dislodged material from entering the living space during cleaning.

3

Duct Branch Mechanical Cleaning

Rotating brush heads work through every supply and return branch duct. Compacted dust, debris, and biofilm are dislodged into the negative-pressure airflow and extracted to our truck-mounted collection system.

4

Blower Wheel & Air Handler Cleaning

The blower wheel is the component that most significantly affects airflow and energy efficiency. We clean each blade individually using compressed air and brushing — a process that takes 30–45 minutes on its own.

5

Evaporator Coil Cleaning

Accessible coil surfaces are cleaned using coil-safe solvent and soft brushing. Condensate drain pan is cleaned and treated. Restricted access coils (certain multi-piece systems) are noted in the completion report.

6

Post-Cleaning Verification & Report

Full photo documentation of every component post-cleaning. Written completion report including ACR compliance notes, component condition assessment, and GWP rebate documentation where applicable.

Transparent Pricing

Flat-Rate Pricing — No Surprise Charges

All prices quoted before work begins. Price does not change once the technician is in your home.

Service Price Details
Full HVAC System Cleaning (≤10 vents) From $299 All ducts + blower wheel + accessible coil + air handler
Full System (11–15 vents) From $399 Larger homes with multiple zones or two-story configuration
Full System (16+ vents) From $499 Large homes, additions, or commercial residential
Coil & Blower Only (no ducts) From $199 Targeted blower and coil service without full duct cleaning
Antimicrobial Treatment Add-On From $89 EPA-registered treatment applied post-cleaning
Bundle: HVAC + Dryer Vent From $349 Full HVAC system cleaning plus dryer vent — same visit

Prices are starting prices. Final quote confirmed before work begins. No travel fees within the service area.

Service Area

Cities We Serve Near You

Based in North Hollywood — serving the entire San Fernando Valley and Greater Los Angeles.

Bundle & Save

Other Services Near You

FAQs

Frequently Asked Questions

Dans Hollywood Chimney & Air Duct Cleaning charges from $299 for a full HVAC system cleaning (all ducts, blower wheel, and accessible evaporator coil) for homes up to 10 vents. 11–15 vents: from $399. 16+ vents: from $499. Glendale Water & Power customers may qualify for GWP rebates on documented HVAC cleaning — we provide the required paperwork. No travel fees throughout the San Fernando Valley.
Air duct cleaning typically refers to cleaning the supply and return duct branches. HVAC cleaning is the full system: all duct branches, main trunk lines, the air handler cabinet, the blower wheel and motor, the evaporator coil accessible surfaces, and the condensate drain pan. The blower wheel and evaporator coil are the two components most responsible for indoor air quality degradation and system efficiency loss — but most companies advertising 'air duct cleaning' do not clean them. Our HVAC cleaning includes all components.
NADCA recommends full HVAC system cleaning every 3–5 years for typical residential use. Systems should be cleaned sooner if: pets are present (pet dander accumulates on the evaporator coil faster than dust), there has been recent renovation or construction generating fine particulates, a household member has been diagnosed with respiratory illness, or the home has experienced wildfire smoke infiltration. The San Fernando Valley's October–December Santa Ana wind events are a specific trigger — smoke and fine ash particles infiltrate HVAC systems during these events and do not fully filter out.
Yes, measurably. The Department of Energy estimates that 25–40% of residential HVAC energy consumption is wasted due to system contamination — primarily blower wheel fouling and evaporator coil buildup. A fouled blower wheel operates at reduced RPM, requiring the motor to work harder and longer to move the same volume of air. A coated evaporator coil cannot transfer heat efficiently, causing the compressor to run in longer cycles. Professional cleaning restores system efficiency and can reduce cooling and heating energy costs by 10–20%.
The evaporator coil is the indoor cooling component — where refrigerant absorbs heat from your air. Over time, biofilm, mold, and condensate residue combine with dust and coat the coil fins, restricting airflow through the coil and dramatically reducing heat exchange efficiency. We clean accessible coil surfaces using coil-safe solvent and soft brushing, then clean the condensate drain pan beneath the coil. Restricted-access coils in certain system configurations require an HVAC technician to access — we note these in the completion report and can coordinate with your HVAC contractor.
Yes. Glendale Water & Power offers HVAC maintenance rebates for qualifying customers. We provide a written completion report formatted for GWP rebate submission on every Glendale HVAC cleaning job. Confirm current rebate availability and eligibility directly with GWP before scheduling — rebate programs change seasonally.
A full HVAC cleaning for a typical San Fernando Valley home (10–15 vents) takes 3–5 hours. The blower wheel cleaning alone takes 30–45 minutes when done properly. Homes with 16+ vents, complex duct configurations, or significant biological buildup on the coil may take 5–6 hours. We do not rush jobs — completion documentation requires that every component is photographed before and after cleaning.
Yes. The evaporator coil and air handler cabinet are the most common locations for mold growth in HVAC systems — moisture from condensate combined with organic debris creates ideal growth conditions. We identify and clean mold-affected components. Where mold is present on duct surfaces, we apply EPA-registered antimicrobial treatment following cleaning to inhibit regrowth. Extensive mold growth on duct liner or air handler insulation may require remediation beyond cleaning — we document and advise on all findings.
Yes — same-day appointments are available most days throughout the San Fernando Valley. Full HVAC system cleaning requires approximately 3–5 hours, so scheduling before noon ensures adequate time. Call (818) 536-7759 for same-day availability.
We primarily serve residential and small multi-unit residential (up to 4 units) HVAC systems. For commercial HVAC inquiries — retail spaces, offices, restaurants — call (818) 536-7759 to discuss the system specifications and confirm whether the job is within our service scope.

Ready to Schedule?

Same-day service available throughout North Hollywood, Burbank, Glendale, Hollywood, Studio City, Sherman Oaks, Van Nuys, West Hollywood, Los Feliz, and Silver Lake.

Call Now
Call (818) 536-7759 Free Quote